JWIN
Jwin JVTV2040 5.5" B/W Monitor with 1 B/W Infrared Camera and 1 60 Ft Cable
Model: jvtv2040

The JWIN JVTV2040 is a low cost security system consisting of a 5.5" B/W monitor, 1 B/W CCD camera and 1 60 ft cable. This single cable carries video and power, making it quick and easy to install. The monitor will accept a second camera for system expansion and supports auto switching of 2-20 second intervals between cameras. The camera features an integrated, adjustable lens and uses an array of built-in infrared LEDs to record in near total darkness.




Key Features

• Easy to Install
The camera attaches to the monitor using the supplied 60 ft cable carrying video and power, making for quick and easy installation.

• Accepts an Additional Camera
The monitor accepts an additional camera for expanding the system. Switching between cameras can be set at 2-20 second intervals using a dial on the monitor's right panel. The monitor features an A/V out port for simultaneously outputting the A/V signal of one camera to a recording device.

• Infrared Illumination
The camera uses an array of built-in infrared LEDs to see in near complete darkness, offering 24-hour surveillance monitoring.


Signal System NTSC (EIA)

Picture Tube 5.5" B/W

Channels 2

Display Modes Full screen with sequential switching

Connectors Video In: 4-pin DIN x2 (video, audio, power)
Video Out to Recorder: 4-pin DIN x1 (video, audio, power)

Dimensions (WxHxD) 8.2 x 6 x 7.6" (20.8 x 15.2 x 19.3cm)

Weight 2.8 lb (1.3 kg)


Camera

Signal System NTSC (EIA)

Image Sensor B/W CCD

Resolution 380 Lines

Lens F=3.6

Minimum Illumination 0 Lux with infrared LED
0.5 Lux without infrared LED

Connector 4-pin DIN (video, power)

Power Requirements 12 VDC (via supplied cable)

Dimensions (WxHxD) 2 x 2.3 x 1.5" (without stand)
50.8 x 58.4 x 38.1mm